ADDER HILL MACHINE Technology

This is a new technology that offers a remarkable solution to the global water crisis. This technology has been developed and now in use in adder Hill air to water generators also known as Adder Hill atmospheric water generators. This technology converts the water in the air into portable water. In other words it can produce water out of thin air.

This revolutionary technology is helping to meet the growing demand for economical, good tasting and quality drinking water.

Adder Hill Machine is a green friendly, alternative water source, for anyone who wishes to maintain control over their own pure water supply. The dew points has been designed to perform at optimum levels, producing high quality water while consuming minimal electricity.

A typical ADDER HILL MACHINE process:

  1. The machine pulls air through the filter, removing air born particles.
  2. A condensation unit receives this clean humid airflow and condenses water vapour into liquid.
  3. Machine collects the water, which drops into a collection tray, and passes through UV light. The water stays in contact with the UV lights fir over 30 minutes. This process kills of over 90% of all germs and bacteria in the water.
  4. The water is then pumped through a sediment screen and then through a number of carbon filters. Usually anywhere between 2-4 carbon filters.
  5. The water may then be pumped through an ultrafiltration membrane to further remove bacteria and viruses. At this stage the water may pass through a further filter where minerals and ozone may be added, depending on the technology used by a particular ADDER HILL Machine brand.
  6. Water is finally pumped into a reservoir tank.
  7. Every 30 minutes or so, water is recycled through a UV light and back.
  8. Water is then chilled or heated and dispensed through the hot or cold tap as required by the consumer.

The biggest advantage of the Adder Hill Machine system is that it is the most effective purification system to date. It utilizes components of other water treatment systems removing everything viruses, bacteria, VOC’s, inorganic chemicals, dirt, pollution and residual chlorine. It is cost effective with just around 18 months to recover the cost of buying an adder hill machine. It’s convenient with no need to transport, carry and tore bottles. A big advantage is its green credentials. It doesn’t contribute to the plastic bottle landfill crisis, doesn’t waste water, very efficient use of power, and it can be run on solar or wind power. The only disadvantage is that it does not provide a high yield of water in areas with low humidity, but it can be connected to a tap water supply to provide high quality filtered water on demand.

How dose it work

Adder Hill Air to water technology, which produces healthy, purified drinking water from the atmosphere we breathe.
Basically, the system is driven by humidity and temperature.
Withdraws fresh water from the air which passes through a condenser which condenses the air into water.

The air is purified before entering into the condenser; it passes through an anti-bacterial air filter to filter out the dust and air borne particles from entering into the machine.
Once the air is subjected to the condenser, the water is then subjected to the water purification processes.

Filtration process:

Sediment filtration: This removes micro particles that are very small in size and also boosts the life of the Reverse osmosis membrane by absorbing the particles to a limited size.

Carbon filtration: This removes any colour, odour, metal particles, and organic compounds.

RO membrane:  The reverse osmosis membrane removes ultra-small impurities, bacteria and other harmful substance of very small micron sizes.

TCR filtration: Provides elements and minerals for the human body, raises the pH levels to light alkaline and maintains these level between the ideal range of 7.2- 7.8.

Ultraviolet Sterilization system: This filter ensures all the bacteria and other harmful micro- organisms of sizes as small as 0.15 microns are eliminated.

The advance Adder Hill Machine also makes use of an Ozone filtration; the Ozone is pumped through the water and binds with the water and oxidizes any other organic impurities and eliminates any that may be present.

Features:

Microcomputer: To ensure the proper working of the internal parts.

Sensors: Electronic sensors which are attached to the UV light, heating mechanism and storage tanks. They give warning signal on improper functioning.

Child proof lock: These are on the hot water nob to protect from children usage.

Water leakage detector: In case of any unexpected water leakage the machine stops working automatically.

The condenser coils: The condenser is designed with a coating to prevent any metal pollution and improve water production efficiency.

 

Strengths & Weakness in the technology:

Strengths: Weaknesses:
  • A product that gives the best solution for the drinking water crisis in the world.

  • The process gives the highest quality of pure drinking water with a very balanced form of minerals which is ideal for the body.

  • Eliminates pollution caused by bottled water. Reduces PET usages etc.

  • Different specifications available for a wide variety of requirements.

  • The production of water is far less expensive process and makes use of the abundant resource, the Air.

  • Compact design and aesthetic design.

  • Produces odour free, chemical free, pollution free drinking water.

  • It would take just about 20 months to recover the cost of purchase.

  • Initially, the machine takes time to produce water.

  • The working humidity (20 -60%) range is very limited.

  • Cannot be used in areas with very low temperatures.

  • The electricity consumption is high, in areas where there is a shortage of electricity the system may not perform well.

  • The system may produce water slowly if the temperature and pressure are not under ideal conditions.

  • It cannot be used in place where the air quality is highly contaminated.

  • Receives filter change every six months.

 

Future outlook with this technology:

Providing power by alternative energy sources like solar & wind. Thus making the system completely Green.

Developing Potable models and increasing the range of panels.

This technology can also be implicated in AC systems, heat pumps, heat exchangers and in systems where the heat transfer required takes place more efficiently by water rather than air.

 

Home I Legal I Credit I Warranty I Press I Terms of use I Privacy Policy I Cookies Policy I Sitemap I Contact
Copyright © 2013-2014 Adder Hill. All rights reserved.